QualityGuidances

ANALYSIS METHOD OF ESOMEPRAZOLE GASTRO-RESISTANT CAPSULES(40 mg)

  GENERAL MATERIAL INFORMATION General Information Esomeprazole  Gastro-resistant  hard gelatin capsules contains Esomeprazole Magnesium Trihydrate  pallets & dummy pallets. Categories Antiulcer Composition Each Hard gelatin capsule contains: Esomeprazole Magnesium Trihydrate  IP……………………….40 mg Reference Indian Pharmacopoeia…

SPECIFICATION FOR WATER AFTER UV LIGHT

  S.NO.                      TESTS                     SPECIFICATIONS 1. Description Clear, colorless and odorless liquid 2. pH Between 5.0 to 7.0 3. Total Hardness NMT 1 ppm 4. Conductivity NMT 30 µS/cm 5. Total Dissolved solids Nil…

SPECIFICATION FOR RO WATER

  S.NO.                      TESTS                     SPECIFICATIONS 1. Description Clear, colorless and odorless liquid 2. pH Between 5.0 to 7.0 3. Total Hardness NMT 1 ppm 4. Conductivity NMT 30 µS/cm 5. Total Dissolved solids Nil…

SOP FOR 70% I.P.A PREPARATION PROCEDURE

1.0 OBJECTIVE   To provide a procedure for the preparation of 70% Isopropyl Alcohol. 2.0 SCOPE   This is applicable to microbiology section as a hand disinfectant liquid. 3.0 RESPONSIBILITY   Microbiologist / Executive -…

SPECIFICATION FOR WATER AFTER SAND FILTER AND CARBON FILTER

    S.NO.                      TESTS                     SPECIFICATIONS 1. Description Clear, colorless and odorless liquid 2. pH Between 6.0 to 8.5 3. Total Hardness NMT 5 ppm 4. Total Dissolved Solids NMT 50 ppm 5. Free…

SPECIFICATION FOR WATER AFTER SMBS DOSING

  S.NO.                      TESTS                     SPECIFICATIONS 1. Description Clear, colorless and odorless liquid. 2. pH Between 6.0 to 8.5 3. Free Chlorine content Nil 4. Total Hardness NMT 350 ppm 5. Total Dissolved solids NMT…

SPECIFICATION FOR WATER AFTER CHLORINATION

  S.NO.                      TESTS                     SPECIFICATIONS 1. Description Clear, colorless and odorless liquid 2. pH Between 6.0 to 8.5 3. Chlorine content Between 0.5 to 1 ppm 4. Total Hardness NMT 350 ppm 5. Total…

SPECIFICATION FOR WATER AFTER SAND FILTER

S.NO.                      TESTS                     SPECIFICATIONS 1. Description Clear, colorless and odorless liquid 2. pH Between 6.0 to 8.5 3. Total Hardness NMT 1000 ppm 4. Total Dissolved Solids NMT 800 ppm 5. Chloride NMT 250…

SPECIFICATION FOR RAW WATER

S.NO.                      TESTS                     SPECIFICATIONS 1. Description Clear, colorless and odorless liquid 2. pH Between 6.0 to 8.5 3. Total Hardness NMT 1000 ppm 4. Total Dissolved Solids NMT 800 ppm 5. Chloride NMT 250…

Specification of Bromelain 2400 GDU

 S.NO.                      TESTS                     SPECIFICATIONS 1. Description A white colored powder, free flowing hygroscopic powder. 2. Odour Characteristic odour of pineapple 3. Origin Ananas comosus 4. Family Bromeliaceous 5. Part of plant used for extraction…